There are always some problems in the use of resin cutting wheels , and these problems always make people scrambling. In order to avoid this situation, before the use of it will appear problems and solutions must be understood, and now its common problems are mainly the following:
First, cutting wheel saw blade damage or broken teeth solution:
(1) Adjust the standard speed of the cut material;
(2) Adjust the feed speed of the knife can not be too fast;
(3) Re-grinding the cutting sheet or note to choose the cutting method need to do special fixture to avoid material shaking;
(4) Cutting different materials need different tooth shape and number of teeth, according to the need to correctly choose not a specification saw blade any material to cut.
Second, the solution of noise when cutting wheel sawing:
(1) Stop the machine for cleaning and check whether the number of cutting teeth is applicable;
(2) Re-grind the cutting wheel;
(3) Check the workpiece clamping device.
Third, cutting wheel is not vertical and inconsistent length solution:
(1) Select good materials and standard materials, and often check the condition of the material rack and positioning ruler, and correct the level of the machine;
(2) Select the correct cutting speed according to different materials, and select the number of teeth according to the wall thickness of the material
(3) Because the cutting wheel has a hammer degree, it is erected and placed to avoid gravity pressure.
