Common problems in the grinding wheel installation process

Porcelain grinding wheels are made of vitrified bond, which is brittle and is processed by high-speed operation. Therefore, some matters need to be paid attention to during the installation and use of the grinding wheel, so as to avoid unnecessary damage and risks. The installation process of the grinding wheel should be common problem:
1. When the grinding wheel is stored and transported, do not subject it to impact or collision. It should be protected from cold and water, placed flat, stacked neatly, and the room should be kept cool and ventilated. Pay attention to dust prevention, keep it clean, and keep it away from pressure.
2. Before the construction of the grinding wheel, at the same time, check whether there are cracks on the surface, and then hang the grinding wheel from the inner hole for training, and tap the grinding wheel with a mallet, and pay attention to whether the impact sound is crisp or abnormal. Hoarse sound, if the sound is hoarse and accompanied by hoarse sound, it also means that the grinding wheel has cracks and cannot be used.
3. After the grinding wheel is tightened with the flange, the balance of the grinding wheel needs to be calibrated in the balancer. After the calibration balance is passed, the CNC grinding machine can be installed for the next step of the process.
4. After installing on the CNC grinding machine, please install the protective cover that meets the requirements as soon as possible. Pay attention to the grinding wheel that has just been installed or used the next day. It must be rotated at a high speed for more than one minute. If everything is normal, then follow the relevant regulations on cutting machinery and equipment. Application of safety regulations.