In the daily cutting wheels application, how to correctly install the cutting wheel is crucial to the safety of production. Below we introduce its installation method and precautions from several aspects.
The correct installation method of the cutting wheels is as follows:
1, select the appropriate cutting wheels . The choice of cutting wheel should be determined according to the type of processing material, thickness and cutting method, unsuitable cutting sheet will lead to poor cutting effect, and even pose a safety threat to the staff.
2. Do your homework. This section describes how to check whether the equipment is qualified and safe to operate. Clean and check the wear degree of cutting pieces, cutting machines and other equipment, and replace or repair if necessary.
3, turn off the cutting machine power supply to ensure that the cutting machine is stopped.
4. Remove the original cutting wheel . Place the cutter in a safe position and use a wrench or box wrench to remove the nuts and bolts holding the cutting pieces in place.
5. Install new cutting sheet. First fix the cutting sheet on the cutting plate, and then fix the nuts and bolts of the cutting sheet with the appropriate tools. During the installation process, it is necessary to ensure that the cutting sheet and the interface of the cutting machine are well fitted to avoid loosening or skewing.
Check that the cutting sheet is firmly installed, and gently twist the cutting sheet to ensure that it is not loose.
6, clean up debris or residues near the cutting area to ensure a clean and safe working environment.
7. Check the safety and reliability of the protective measures of the cutting equipment, turn on the power supply of the cutting machine, and carry out the trial operation of the cutting pieces.
Note:
1, when installing the cutting wheels , the arrow direction should be consistent with the rotation direction of the cutting machine.
2, after the installation of the cutting wheels , it is necessary to test cut to ensure the cutting effect and safety.
3, in the process of use, if the cutting wheels is found to have abnormal noise or poor cutting effect, it should be stopped immediately for inspection.
Replace the cutting pieces regularly to reduce the risk of wear and breakage.
If you have any installation or other problems during use, you can contact us and we will do our best to solve your worries.
