Home > Blog > Content

How To Use An Angle Grinder Safely And Correctly? This Is The Guide

May 13, 2025


Angle grinder, which is also often referred to as grinder or disc grinder, is a widely used abrasive tool for cutting and sanding fiberglass. Apart from that, it also has an indispensable role in several industries such as carpentry, masonry, welding and so on. But how to use the angle grinder correctly, and what safety matters need to pay attention to in the process of using it? Next, we will answer these questions for you in detail.

news-455-536

Angle grinder use and safety norms
Angle grinders, a tool that plays an important role in many areas such as fibreglass cutting, grinding, and carpentry, masonry, welding, etc., are critical to their use and safety practices. The following are specific guidelines for the operation of angle grinders:

Switch on the machine for a trial run: before use, be sure to switch on the machine for a trial run to confirm that the abrasive disc is running smoothly and without abnormal vibration. At the same time, check the wear and tear of the carbon brushes and have them replaced by a professional at the right time.

news-623-361


Safe operation: In the operation process, it is strictly prohibited to use it on the surrounding people and flammable and explosive materials, keep the workplace neat and clean to ensure the safety of people and property.

Check the protective cover and auxiliary handle: Before use, carefully check whether the protective cover and auxiliary handle are intact and undamaged to ensure the safety of use.
Power supply check: before plugging in, you must make sure that the machine switch is off, and check whether the power cord is broken or not.
Grinding wheel disc installation: Before loading the grinding wheel disc, you need to check whether it is damp or broken, the installation must be firm, and it is strictly prohibited to use non-special tools to knock the grinding wheel clamping nut.
Control strength: keep the appropriate tilt angle when using, control the cutting strength, avoid heavy pressure, tilting or shaking. Keep the parallelism between the cutting disc and the cutting edge of the sheet, avoid cutting under side pressure.
Uniform force: Avoid excessive force, should be slowly and evenly force, in order to prevent the sanding blade collision broken. If there is any jamming phenomenon, lift up the sander immediately.
Safety protection: It is strictly prohibited to use the sanding machine without safety shield, and the shield should be repaired or replaced in time if it is loose. Protective glasses and dust mask must be worn during operation.

Cooling and rest: If the temperature of the grinder body is too high, it should be stopped immediately to cool down naturally before use.
Specialised tools: Specialised tools must be used when replacing the angle grinding discs and make sure that the power supply has been switched off or the power cord has been disconnected.
Regular Inspection: Regularly check whether the bearings, gears and cooling air blades of the transmission part are intact, and add lubricating oil at the right time to prolong the service life of the grinder.
Following these operating methods and safety regulations will enable you to use the angle grinder more safely and effectively.

Safe use of angle grinder operating procedures:
I. Preparation before use
The angle grinder should be handled by a special person and inspected regularly to ensure its normal operation.
When replacing the new grinding wheel, the main power supply must be cut off first. The grinding wheel disc should be carefully checked for cracks before installation, and its quality can be identified by lifting the grinding wheel and gently tapping it.
The angle grinder must be equipped with a firm and suitable grinding wheel cover, and the distance between the bracket and the grinding wheel must not exceed 5mm, otherwise it must not be used.
When installing the grinding wheel, make sure that the nut is properly loosened and tightened, and check whether the nut is loose before use.
After the installation of the grinding wheel is completed, it is necessary to carry out an idle test for 2 to 3 minutes to check whether its operation is balanced and whether the protection device is reliable. During the test, two staff members should be arranged, one to start the grinding wheel, and the other at the switchboard ready to cut off the power supply.
Users must wear protective goggles, stand on the side of the grinding wheel, not facing the grinding wheel. It is strictly prohibited to wear gloves and use cotton gauze and other things to wrap the tool for grinding.

news-461-320


Before use, the integrity of the grinding wheel should be checked again, the firmness of the grinding wheel shaft and whether there are debris between the angle grinder and the shield. After confirming that there is no error, the angle grinder can be opened.
Second , the use of the process of attention
1.Before starting the grinding wheel, you must wait for 40-60 seconds for the speed to stabilise before grinding. When grinding, should stand on the side of the grinding wheel, to avoid the grinding wheel piece broken flying out to hurt people.

2.The same piece of grinding wheel is prohibited for two people to use at the same time, more forbidden to grind on the side of the grinding wheel. During the grinding process, the operator should stand on the side of the angle grinder, not on the front, in order to prevent accidents caused by grinding wheel chipping. At the same time, it is strictly prohibited to wear gloves and operate around the pile.
3.When grinding, the standing position should be at an angle with the angle grinder, and the contact pressure should be even, and it is strictly prohibited to hit the grinding wheel. The grinding wheel is limited to grinding tools, and shall not grind bulky materials or soft materials.
4.When grinding, the operator should stand on the side or oblique side of the grinding wheel, and the tool should be slightly higher than the centre of the grinding wheel. The grinding process should not be too hard to prevent slipping and hurting hands.

news-390-369


5, the grinding wheel should be kept dry, avoiding water, in order to prevent the loss of balance after wet water, resulting in accidents.
6,Angle grinder is not suitable for grinding larger or longer objects to prevent the grinding wheel from shattering and flying out due to vibration, causing injury.
7, in the grinding process, must hold the workpiece with both hands, to avoid one-handed operation leads to the workpiece fall off and stuck into the shield, thus damaging the grinding wheel

news-462-322

Send Inquiry