Reveal The Reason For The Cutting Wheel Getting Stuck

Cutting grinding wheels are widely used in many industries because of their high efficiency, convenience and economy. In order to achieve safe production and improve production efficiency, we must follow conventional rules. If you use a cutting wheel that does not match the workpiece to be cut, it is prone to abnormal wear, Poor sharpness, abnormal heating, etc. In addition, it should be noted that when the flange is too small or the precision is poor, it is easy to damage, please use it after improvement, what should you do if it is stuck by the cutting wheel? The following analysis for you:
1. Improper use of cutting wheel
Solution: According to the material properties of the workpiece, use a suitable cutting wheel.
A lot of burrs can be produced after cutting.
2. The cutting wheel is too thick
Solution: Use a thinner cutting wheel.
3. The grain size of the cutting wheel is too coarse
Solution: use a finer-grained cutting wheel.