Sandpaper is one of the tools commonly used in woodworking, can be used to polish wood products, make it more smooth, often used to polish wood sandpaper is wood sandpaper, generally dry sandpaper, water sandpaper and iron sandpaper can also be used to polish wood, but usually less, commonly used or wood sandpaper. Wood sandpaper can be polished at various stages of wood processing, but different stages are suitable for different types of wood sandpaper, such as 80 purpose sandpaper for white stubble and 360 purpose sandpaper for flat grinding. Let's take a look at what type of wood sandpaper is used.
What kind of sandpaper is used to sand wood?
Wood products, wood furniture usually need to be polished processing, the purpose is to smooth the surface of the material, remove wood hair, dust particles on the film surface, air bubbles, the film surface sand rough to improve the adhesion of the coating, the commonly used grinding tool is sandpaper, sandpaper for grinding wood mainly:
1, wood sandpaper
Wood sandpaper is commonly used to polish wood sandpaper, generally with the appropriate model of wood sandpaper along the wood grain sand can be ground, wood is not smooth, can be wrapped in small wood blocks or hard rubber wood sandpaper to polish.
2, waterproof sandpaper
Water sandpaper can also polish wood, but it is less used, because water sandpaper should be polished with water, which may affect the wood.
3, iron sand paper
Iron sandpaper is a kind of dry abrasive paper, rougher, usually used to polish the metal surface as soon as possible, and can be used to polish wood, but it is generally used for rough grinding.
Second, what type of wood sandpaper is good
When grinding wood, you need to choose the right sandpaper, generally using wood sandpaper will be better, from stubble wood products to wood polishing can be used, only need to replace the model of wood sandpaper according to different grinding stages.
then what model of wood sandpaper is suitable?
1, under normal circumstances, wood products are white stubble state, commonly used 80 purpose wood sandpaper for grinding, mainly to remove wood hair, scars, glue and pencil marks and other dirt.
2, and then use 360 purpose wood sandpaper for edge, burring, this step is flat grinding, can be wrapped in small wood blocks or hard rubber wood sandpaper on the large plane for grinding.
3. After painting the wood products, the primer is fully ground with 360 purpose wood sandpaper, and then the sand marks are fully collected with 600 purpose sandpaper.
4, the final polishing stage, the use of 1000-1500 purpose wood sandpaper for full grinding, polishing bright spray paint can be.
Through the above introduction, you can roughly understand how to choose the sandpaper for polishing wood. If you need anything, please do not hesitate to contact us.
