Check whether the saw blade is damaged, whether the tooth shape is complete, whether the saw blade is smooth, and whether there is any abnormality in the grinding wheel saw blade. When assembling, make sure that the arrow direction of the saw blade is consistent with the rotation direction of the equipment spindle.
Before starting the equipment, under the condition of ensuring safety, one person should operate the equipment, gently push and idle, and check whether the equipment rotates and vibrates correctly.
After installing the grinding wheel saw blade, it must be idle for a few minutes. It works fine if it doesn't slip, wiggle or jump.
Grinding wheel saw blades are widely used products in daily life, featuring high tensile strength, impact resistance and bending strength. However, grinding wheel saw blades sometimes become soft in daily life. Below is a brief description.
1. The furnace or kiln is too fast or the temperature difference is too large. Since the grinding wheel saw blade should have a certain cooling time to meet the uniform release of stress at the end of quenching and heat preservation; at this time, if the discharge temperature is too high or the temperature difference changes too much, the grinding wheel saw blade will be deformed.
2. Elimination of quenching humid atmosphere in the quenching furnace. Since the grinding wheel saw blade will release a large amount of exhaust gas during the hardening process, if the exhaust gas cannot be discharged in time, the exhaust gas will be reabsorbed by the pores during the cooling process, which will cause the grinding wheel saw blade to smell or become soft.
3. The hardening curve time is short. This mainly means that under certain conditions, in the heating stage, the low-temperature drying time of the hardening curve of the grinding wheel saw blade is short, and the heating speed is too fast.
4. Low hardening stability. This means that due to the double influence of the environment and raw materials, when the seasons alternate or the temperature and humidity change significantly, the hardening temperature should be provided in time. When the stability is reduced and the weather is dry, the hardening stability will not be reduced in time, which will also easily cause the softening of the grinding wheel saw blade.
Use Of Grinding Wheel Saw Blades, Reasons For Softening
May 03, 2023
Send Inquiry
Latest News
Contact Us
- Mob: +8613361403292
-
WhatsApp:+8613361403292
-
wechat: +8618560921569
- Email: yfabrasive@163.com
- Add: Room 7307 Hongyi Chuanggu, Huahong Publishing Industrial Park, No.7 Minxiang North Road, High-Tech Zone, Zibo City, Shandong Province.









