The CNS flap disc is made of open strong continuous nylon fibers bonded with coarse emery abrasive grit evenly distributed in the material. This structure gives it an excellent grinding effect.
Our production specifications are 100*16 115*22 125*22 can be customized 150*22 180*22 230*22.
Which colors of the CNS flap disc ?
CNS flap disc is generally available in black, blue, purple and red, except that black is the standard version of the product, which can achieve a finer surface finish cleaning and is more flexible when used. And other colors of black gold steel products, has a very high cutting rate.
So which industries does the CNS flap disc apply to?
Metal rust removal: The black gold grinding sheet can effectively remove rust and oxide on the metal surface.
Automotive paint removal: In the field of automotive repair and beauty, black gold abrasive flakes are used to remove paint and coatings from automotive surfaces.
Ceramic grinding: In the field of ceramic processing, black gold grinding plates are used to grind and polish ceramic surfaces.
Removal of oxides and dirt before and after welding: In the process of metal welding and melting, the black gold grinding sheet can remove oxides and dirt before and after welding.
The CNS flap disc is derived from an open soft back base and a tough abrasive (namely, emery coarse sand), so it is safer to use when the grinding force is uniform, the processing result is uniform, wear-resistant, water resistance, plasticity, softness is good, suitable for various shapes of the grinding body, dirt will not block the grinding surface seam, increase the surface adhesion of the grinding material; Controlled cutting, will not harm the surface of the ground; No rust, no falling off, small grinding sound, less dust and so on. Black gold is better than the general Angle grinding blade, impeller grinding effect.
so if you need CNS flap disc , please visit the following website:
