In addition to sandpaper, other tools also can be use for polishing the paint which is faster.So what kind of grinding toold does the paint use?
You can use CNS flap disc , because the CNS flap disc can not only effectively remove the impurities left on the surface of the object, but also will not change its shape. In addition, its ventilation can also reduce the temperature and noise of the working surface of the object, reducing the appearance of particles and sparks.
Benefits of using CNS flap disc paint sanding:
1, can quickly remove burrs, floating rust, oil, dust and other substances on the surface of the sand plate.
2, can reduce the roughness of the paint surface, because after the plate is scraped through the putty, the surface of the uneven problem, at this time you can rely on grinding to make the surface of the plate more smooth and smooth.
3, it can make the adhesion of the coating better, so that the coating and the substrate can be more dense and strong together.
In which stage of paint grinding:
Under normal circumstances, the paint can be completely dry after 8-12 hours, and the paint can be polished after dry. However, the specific time should be determined according to the season, temperature, paint type and construction environment.
Sanding paint note:
1. When polishing the paint, observe whether the surface is smooth and uniform at any time. In addition, after grinding is completed, it is necessary to use more than 200 watts of light bulb irradiation to see whether the flatness of the paint meets the requirements, if it does not meet the requirements, it needs to be re-polished.
2, under normal circumstances, after painting three times of putty, you need to polish once, after polishing to check again, will have a pit, and then polish, and then check, until it meets the requirements, do not cut corners, otherwise it will affect the final effect.
if you need CNS flap disc , please visit our following website :
