Influence Of Shape And Balance Of Ultrathin Disc Grinding Wheel On Cutting Performance

The following is an analysis of the influence of the shape and balance of the ultra-thin disc grinding wheel on the cutting performance:
For ultra-thin disc grinding wheels, there are many factors that affect its cutting performance, and its shape and balance are two of them. So what influence do these two factors have on its cutting performance?
1. When the end of the cutting piece has a large jump, it will swing back and forth during cutting. The cutting width is large, and the material to be cut is unnecessary consumption. It will be larger, which will easily cause the cutting parts to fall off, affecting the strength and cutting, but it will be automatically trimmed after cutting, and the overall impact is not great.
2. When the thickness is large, the slit is wide and the consumption of cutting parts is large; in the case of ensuring the strength, the smaller the thickness, the better, which not only saves the cutting material, but also saves the cutting material; when the flatness is large, the slit The width of the cutting part is determined by the ultra-thick part, while the strength is determined by the ultra-thin part. The wear and vibration are large during cutting, which will affect the entire cutting process. When the thickness of the cutting part is large in the middle and the thickness of the side is small, the side of the cutting part will The workpiece is ground.
3. The more unbalanced, the greater the vibration during cutting, which will easily cause the cutting parts to fall off and affect the strength.