What Should Be Paid Attention To When Using Ultra-thin Disc Grinding Wheels?

1. Wear goggles, masks, earplugs, gloves and dustproof clothing;
2. Never use the edge of the resin slice;
3. Use ultra-thin grinding wheels below the maximum working cycle speed and maximum working revolution;
4. Use the correct flange, no reinforcement: more than 1/3; reinforcement: more than 1/4;
5. Before use, confirm that the ultra-thin grinding wheel has no edges, cracks, cracks, etc.
6. Before using the ultra-thin disc grinding wheel, please idle for one minute before using it. When replacing a new ultra-thin disc grinding wheel, please idle for three minutes before use.
7. Put the ultra-thin sheet grinding wheel in a place without direct sunlight and moisture, and place it horizontally;
8. Firmly fix the cut object;
9. Use an angle grinder with a safety cover and a cutter with a safety cover;
10. If the inner diameter of the ultra-thin disc grinding wheel is small and does not match the equipment, please do not change the hole diameter of the grinding wheel.
Only by taking the above safety protection measures can we ensure the smooth progress of efficient production.